Designs

MoveluX

MoveluX is Toshiba's heat-pipe-cooled, calcium-hydride-moderated multipurpose microreactor, at conceptual design in the 2020 IAEA booklet.

Reactor type
Heat-pipe microreactor. How it works, with a 3D view.
Projects
No projects tracked here. Development status as stated in the catalog dated 14 Feb 2025: Conceptual design.
Evidence
3 sources; first primary source: NEA Small Modular Reactor Dashboard — Third Edition (2025). Record reviewed 2 Oct 2026.
Schematic of eVinci, this type's example. A horizontal canister holds a graphite core block with rows of fuel compacts, with control drums above and below it and shutdown rods coming in from the left.
Schematic of eVinci, this type's example.

Catalog identity snapshot: 14 Feb 2025 (NEA assessment cutoff). Later technical descriptions, where recorded, are dated separately below. Source review does not establish current availability or a deployment.

Key facts

Class
Microreactor
Technology
Other (see description)
Coolant
Other (see description)
Spectrum
Thermal
Developer / vendor(s) as of 14 Feb 2025
Toshiba Energy Systems & Solutions Corporation
Fuel form
U3Si2
Development status (as stated)
Conceptual design
Inclusion basis
Labeled microreactor
Confidence
medium
Not yet recorded
Expected but not recorded as a structured fact: Module rating. A missing structured fact does not mean zero or that it does not exist; a documented review limit is named beside the fact, and the description and sources may say more.
Record reviewed
2 Oct 2026 (record review date, not proof of current availability or a deployment)

All fields

(2 without a known value)
Module electrical
Not recorded
Module thermal
Not recorded

Tracked deployment projects

  • No projects tracked here.

Design sources

(3)

Evidence and open questions

(2 notes)
  • Evidence review. The 2020 IAEA booklet describes Toshiba Energy Systems' MoveluX as a 10 MW(t) class multipurpose microreactor that generates around 3 to 4 MW(e), using a heat pipe for primary cooling, with no bulk coolant and a sodium heat pipe, and a helium secondary loop. The NEA third edition calls it a heat-pipe-cooled calcium-hydride-moderated microreactor in conceptual design. ARIS says sodium is the heat-pipe working fluid. Stored vendor, thermal spectrum and family other stay. Coolant stays other because the booklet's own coolant entry is none, qualified as sodium heat-pipe cooling, rather than a bulk sodium circuit. The booklet output is not stored. No site is named. Last checked 19 Oct 2026. IAEA 2020 SMR book: HTR-10 technical table; NEA Small Modular Reactor Dashboard — Third Edition (2025); IAEA ARIS design record: MoveluX
    What would change this

    A Toshiba specification that replaces the 10 MW(t) class and approximate 3 to 4 MW(e) figures with a single basis. Next scheduled check: 19 Jan 2027.

  • Module rating. The 2020 booklet says MoveluX is a 10 MW(t) class reactor and generates around 3 to 4 MW(e). The figure is not stored on this identity profile. Last checked 19 Oct 2026. IAEA 2020 SMR book: HTR-10 technical table
    What would change this

    A later developer or regulator specification that states this design's module output with an explicit basis. The figure would still not be stored while the identity-only rule stands. Next scheduled check: 19 Jan 2027.